Maritime Certification Capability

   
All Winmate's RUGGMATE Marine Grade products are designed according to :

IEC60945 (Fourth Edition, Aug 2002)
Maritime Navigation and Radio-communication
Equipment and Systems


DNV Standard for Certification 2.4 (April 2006)
Environmental Test Specification for Instrumentation
and Automation Equipment

IACS-E10 (2006)
Concerning Electronic Installations
CE/ FCC Class B


  See our test reports and certificates.
 
DET NORSKE VERITAS (DNV), one of the leading ship classification societies,is an autonomous and independent foundation for safeguarding life, property and the environment in maritime environment including sea and onshore.

DNV approved products make sure they meet a set of requirements through design, manufacture and operation. DNV undertakes the marine certification to make verification for the product to fit in different kind of maritime applications.

For more detail information about DNV services please check
www.dnv.com/maritime
Standards for Certification
DNV classifies tests in four levels base on the product applied location in ships-A, B, C, and D.
For worseharsh environment use, the much strict standard testing is required. (See Table of Location
Classes Selection Guide) Standards for Certification including contain principles, acceptance criteria and
practical information related to the Society's consideration of objects, personnel, organizations,
services and operations. A list of Standards for Certification is found in the latest edition of Pt.0 Ch.1
of the ”Rules for Classification of Ships” and the ”Rules for Classification of High Speed, Light Craft and Naval Surface Craft”
Table of Location Classes Selection guide
 
Column I
Column II
Parameters Location within main area

MAIN AREAS ON BOARD
Machinery
spaces		 Control room,
Accommodation		 Bridge Pump room, Holds,
Rooms with no heating		 Open Deck
Temperature Inside cubicles, desks, etc. with
temperature rise of 5°C or more		 B B B D D
All other locations A A A C D
Humidity Locations where special precautions
are taken to avoid condensation		 A A A A A
All other locations B B B B B
Vibration On machinery such as internal
combustion engines, compressors,
pumps, including piping on such
machinery 		B — — B B
Masts — — — — C
All other locations A A A A A
EMC Electromagnetic
compatibility		 All locations within specified main
Areas		 A A B A B
Enclosure Submerged application D — — D D
Below floor plates in engine room C — — — —
All other locations B A A B C
   
  DNV certification below or browse our website to get more details about this test report.
You may refer to the above certification details. You can see our products are certified to be used in the areas of Machinery spaces, Control room, accommodation, Bridge area. The tests are carried out according to Standard for Certification No. 2.4, April, 2006, also covering IACS Unified Requirements E10 Rev.5. The units also tested as protected equipment according to relevant parts of IEC 60945, 4th edition, also the Marine Equipment Derivatives. (MED)
Some testing details:
 
 
 
 
 
   

Top